Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2007 15:50:59 GMT -5
It is pretty simple, you will need 4 3" pieces of 1/4" rod 1 3" piece of 1"x1/4" flat bar 1 piece of Rebar cut to the length you prefer. cent each piece of 1/4" rod and place on each end of the flat bar. Tack all 4 pieces then weld them out. Then weld to the piece of rebar, You will need to bend the rods on the top up and the ones on the bottom down some. It is easier if you wait until you have the rebar welded on and use a box in wrench to bend them with. finished product
|
|